LOW COST SHIPPING AVAILABLE! Ask about interest-free payments too.
LOW COST SHIPPING AVAILABLE! Ask about interest-free payments too.
The perfect fit for your compact tractor, this rear blade is an economical choice for leveling, backfilling, grading, and removing snow on farms or acres. Designed & made in the USA.
Forward and Reverse - The blade rotates a full 360 degrees to be pulled or pushed.
Angles - Five forward and five reverse settings allow you to adjust the angle of the blade.
Offsets - Slide the blade left or right (up to 12 inches).
Tilts - Raise or lower either end until the desired tilt is reached (up to 7.5 degrees from center).
Category 1, 3-Point Hitch - A 3-point hitch is used to connect your rear-mounted blade attachment. An adjustable top link is centered above two lower link arms, comprising the three points. The angle blade attaches easily with connecting pins at each point.
Includes a 12-month warranty
Tractor Horsepower - 18-60 (60"), 18-60 (72"), 26-60 (84")
Operating Weight - 308 lbs (60"), 332 lbs (72"), 348 lbs (84")
Length - 40 in (60"), 40 in (72" & 84")
Moldboard Width - 60 in (60"), 72 in (72"), 84 in (84")
Moldboard Height - 15 in
Cutting Edge - 6 in
Hitch - Category 1
Adjustment Types - Manual (360 Degree Rotation)
Forward Pivot - 5 Positions (7 degrees each)
Reverse Pivot - 5 Positions (7 degrees each)
Offset Slide (Max) - 12 in. left or right
Tilt (Max) - 7.5 degrees from center
Copyright © Crooked River Equipment - All Rights Reserved.